M200T

Description

50Hz	M204T	M204ST	M404T
Discharge Connection	3″	3″	3″
Rated Power [HP/kW]	3/2.2	3/2.2	4/3
Speed [rpm]	2850	2850	2850
Rated Current @ 230v (1 Ph.)	N/A	19A	N/A
Rated Current at 415v (3 Ph.)	5.4A	N/A	7.2 A
Solids Passage [mm]	6	6	6
Submergence [min, max ]	Min – 100mm, Max – 10m	Min – 100mm, Max – 10m	Min – 100mm, Max – 10m
Height [mm]	623	675	661
Weight [kg]	32	38	37

50Hz	M100T	M100ST	M120T	M154T	M154ST
Discharge Connection	2″	2″	2″	2″/3″	2″/3″
Rated Power [HP/kW]	1.5/1.3	1.5/1.3	2/1.5	2/1.5	2/1.5
Speed [rpm]	2850	2850	2850	2850	2850
Rated Current @ 230v (1 Ph.)	N/A	9.5A	N/A	N/A	14A
Rated Current at 415v (3 Ph.)	2.3A	N/A	3.9A	4.11A	N/A
Solids Passage [mm]	6	6	6	6	6
Submergence [min, max ]	Min – 50mm, Max – 15m	Min – 50mm, Max – 15m	Min – 50mm, Max – 15m	Min – 50mm, Max – 15m	Min – 50mm, Max – 15m
Height [mm]	384	407	414	593	623
Weight [kg]	18	22	22	28	32

Specifications

MOTOR

2-pole induction continuous rated motor with squirrel cage rotor.Stator insulation class ‘H’ (180ºC)

BALL BEARINGS

The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.

POWER CABLE

Waterproof/oil proof, PVC insulated double sheathed, copper conductor flexible cable, 20M length of size.

SHAFT SEAL

Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.

CORROSION RESISTANT

Epoxy coated Extruded Aluminum Outer Casing

Epoxy coated Extruded Aluminum Stator Casing

Nitrile Rubber– Lined Diffuser/Wear plate. Polyurethane Optional.

Shaft: 431 Stainless Steel

Hardware: 304 Stainless Steel

Impeller: Nitride Hardened 410SS to 52HRC is Standard.

pH range 5 – 8

OUTLET

HOSE / BSP